Floor Cleaning is a necessary part of any home, but it can be a bit daunting. From tracked in dirt to stains from spills, floors can get pretty grimy.
Different materials require specialized cleaners to avoid damage or 매트리스청소업체 fading. In the worst case, poorly cleaned floors can create slip and fall hazards.
Vacuuming
Vacuuming is a gentle way to lift dust, dirt and debris from floors. It’s a good idea to do it frequently, especially in high traffic areas. Using a vacuum with different attachments for different floor types is best. For example, a crevice tool may be helpful for getting into corners and tight spaces.
Vacuming also helps extend the life of carpeting, area rugs and flooring by preventing break down of fibers, matting and foul odors. Vacuuming also preserves air quality by reducing the work your air filtration system has to do to clean indoor air.
Using a vacuum to remove dry debris also saves time when mopping. A study done in a university found that it took janitor 47 minutes to vacuum and damp mop one classroom, but only 25 minutes when they used a vacuum first. The savings in moving furniture around and in replacing the mop bucket water made a huge difference in efficiency.
Sweeping is a faster way to get your floors clean than mopping, but you’ll need to do it more frequently as the dirt will build up quicker. Ideally you’ll sweep your hard kitchen floors or tiling every day and your soft flooring such as hardwood, bamboo or cork once a day. Sweep in sections so you’re not lugging a giant pile of dust all over the room, and be sure to move small furniture items around to get into those little crevices.
Sweeping
Whether you have tile, vinyl or hardwood floors, they need to be swept regularly to remove dust, dirt, and other debris that can scratch the surface and cause it to become dull. Sweeping also helps to prevent accidents by removing slippery grit and other obstructions.
Keeping up with routine floor cleaning helps keep a space sanitary, clean and safe for staff. Properly cleaned floors help reduce the spread of germs and bacteria, improve indoor air quality, and prolong the life of the flooring.
Cleaning products and equipment vary by type of flooring and level of cleanliness required. For example, high-traffic areas may require the use of industrial sweepers or even scrubbers for a deeper clean. And while residential cleaners are fine for homes, it’s important to use commercial cleaners in businesses.
When mopping, it’s best to use a clean microfiber cloth or mop and a small amount of cleaner. This ensures that you don’t over-soak the floor, which can leave a grimy residue and damage the floor. And don’t forget to rinse your mop and bucket! Using fresh, hot rinse water helps eliminate any detergent residue and allows the floor to dry quickly. This prevents mold and other harmful substances from growing in damp spaces.
Mopping
Mopping isn’t the most exciting part of cleaning but it is important to do it correctly to get your floors really clean. Before you begin, remove all rugs and furniture from the floor. This will make it easier to spot dirt that may be hiding underneath. Also, it will help prevent dust bunnies from being pushed around by your mop. Next, sweep the floor to pick up any loose dirt or debris. Do this every day or at least every other day to keep dirt from building up, which will then take longer to remove with a mop.
Next, put cold water in your mop bucket and add a little bit of dish soap. It is important to use cold water because hot water can damage many types of flooring, including hardwood. Make sure to wring out your mop well, so it is not dripping wet.
Begin at one end of the room and work your way to the door, mopping in straight lines. It is important to move quickly when mopping so that you don’t leave streaks or water spots. You should also try to avoid stepping on areas that you have already mopped, as this can cause them to stick and will require more time to clean off. Once you are finished, your floors should be squeaky clean and should have very little cleaning solution residue left on them.
Rinsing
Before mopping, sweep your floor again to remove any dirt or debris that the vacuum cleaner might have missed. If your floors are hardwood, make sure you are using a commercial-grade wood cleaner that is safe for the material and follow the instructions on how to properly use it. Lightly dampen a microfiber mop and apply the cleaner to your floor, following the direction of the wood grain. Avoid over-saturating your mop and never leave a residue or film on the floor.
If you have linoleum, vinyl or tile floors, you will need to use an appropriate cleaning solution for those materials and the specific type of flooring. Generally, these products should be tested on a small section of your floor to ensure they are suitable for the surface and don’t cause any damage.
For concrete floors, a string mop or fabric mop with a wringer bucket can be used to safely clean the floors. Use a solution of water and a few drops of dish soap or, for an environmentally-friendly option, vinegar. The natural enzymes in the vinegar break down food, pet, and household stains and eliminate odors without leaving any chemical residue or film.
Rinse your floor a final time with clean, hot rinse water. Be sure to sanitize your mop and mop bucket before storing them away. Then, barricade all family members and pets from walking on the floors until they are completely dry. If necessary, open windows and turn on fans to speed up the drying process.